Service Wire Co. SW-SERVICE-DRIVE-TRAY-1KV VFD Tray Cable

VFD Tray Cable (1kV)Brand: Service Wire Co. · SKU: SW-SERVICE-DRIVE-TRAY-1KV · Category: Wire & cable · Type: VFD CableService Wire SW-SERVICE-DRIVE-TRAY-1KV, sold as VFD Tray Cable (1kV), is a 1kV variable frequency drive tray cable rated RWU90, built with three stranded XLPE-insulated copper conductors, three symmetrical bare copper grounds, and a helically applied copper tape shield giving 100 percent coverage, under a black PVC jacket. It is rated 90C for wet or dry service and approved for direct burial and Class I/II/III hazardous locations, and is intended for drive-to-motor wiring where a tray-cable construction, rather than an armored MC cable, is specified. The full-coverage shield helps contain the electrical noise generated by VFD switching. Optional CPE or LSZH jackets, tinned conductors, and 50% ground sizing can be specified, and the product listing notes a dual 1,000/2,000V rating. SW-SERVICE-DRIVE-TRAY-1KV is a bid-only cable; length, jacket, and conductor options are configured per project and quoted on request.Specifications

Voltage rating: 1,000V (RWU90-rated); dual 1,000/2,000V per listing

Conductors: 3 stranded XLPE-insulated copper plus 3 symmetrical bare copper grounds

Shielding: Helically applied copper tape shield, 100% coverage

Jacket: Black PVC (CPE/LSZH alternatives available)

Ratings: 90C wet/dry, direct burial, Class I/II/III hazardous locations

QuestionsWhat shield coverage does SW-SERVICE-DRIVE-TRAY-1KV use?A helically applied copper tape shield giving 100 percent coverage.Are jacket alternatives available for this cable?Yes, optional CPE or LSZH jackets are available in addition to the standard black PVC jacket.Specification sheet (PDF)Back to the catalog