Milbank UQFP-100 100A 2-Pole Plug-In Breaker

MILBANK 100 AMP 2 POLE 240V PLUG-IN 10KAICBrand: Milbank · SKU: UQFP-100 · UPC: 00784572146495 · Category: Enclosures · Type: EnclosuresMilbank UQFP-100 is a 2-pole, 240 volt plug-in circuit breaker from the Milbank MSCB product family, listed under enclosures. It is rated 100 amps, has a bus-to-lug connection on a plug-on design, and carries a 10,000 amp interrupting capacity (10kAIC). This breaker is built to plug into a Milbank meter socket or load center bus rather than bolt to line and load lugs, so an electrician can install or swap it without hardware at the bus connection. Its thermal magnetic trip responds to both a sustained overload and a short-circuit-level fault, and its lever actuator gives a visible on, off, and tripped position. It measures 6.063 inches by 3.281 inches by 3.0 inches and is UL Listed, rated for use in a 40 degree Celsius ambient, with no auxiliary contacts.Specifications

Amperage: 100 A

Poles: 2

Voltage: 240 V

Interrupt rating: 10,000 AIC

Connection: Plug-on, bus-to-lug

Trip type: Thermal magnetic

QuestionsWhat is the interrupting rating of the UQFP-100 breaker?It is rated 10,000 amps interrupting capacity (10kAIC).Is the UQFP-100 a plug-in or bolt-on breaker?It is a plug-in breaker with a bus-to-lug connection.Specification sheet (PDF)Back to the catalog