Brand: Milbank · SKU: UA4667-X-8062 · UPC: 00784572273115 · Category: Enclosures · Type: Meter Sockets
Milbank UA4667-X-8062 is a bolt-in meter socket from the Milbank KSER product family, listed under enclosures and meter sockets. It is rated 480 amps continuous, built with 7 terminals on a large closing plate, an unpainted aluminum enclosure, and a link bypass, and is configured for 3-phase service. Unlike the lay-in or lever-clamp terminals used on smaller residential sockets, a bolt-in socket like this terminates conductors on a half-inch stud on the line side, which is typical of larger commercial and industrial metering where heavier conductors and higher fault currents are involved. The link bypass lets the meter be removed for testing while a physical link keeps the circuit closed. The enclosure measures 6 inches by 20.25 inches by 34 inches, is UL Listed and rated Type 3R for outdoor use, carries a 600 volt AC insulation rating, and accepts overhead or underground cable entry with a triplex ground configuration.
It is configured for 3-phase service.
It is a bolt-in socket with a half-inch stud line-side terminal, rather than lay-in terminals.
Specification sheet (PDF)
Back to the catalog