Milbank PB-034-NK 400A 3PH Cabinet No Knockouts

400 AMP 3 PH 600 VOLT 16INX36INX7IN PNTD STL NO KO LIFT OFF SCR FRONT .5-13 STUDS 1 LUG PER LND - 4-600KCMIL 10K AICBrand: Milbank · SKU: PB-034-NK · UPC: 00784572200326 · Category: Enclosures · Type: EnclosuresThe Milbank PB-034-NK is a termination cabinet for line to load distribution on a 3 phase electrical service, rated up to 400 amperes and up to 600 volts alternating current. It is a lift off, screw front cabinet built from G90 galvanized steel with a powder coat finish in ANSI 61 gray, and it is supplied with no knockouts for field cut cable entries. Line side termination is made at a 1/2 to 13 stud, and the load side accepts one lug per landing sized for 4 AWG up to 600 kcmil conductors in copper or aluminum. The cabinet carries a short circuit rating of 50,000 amperes and uses polypropylene insulation. The PB-034-NK is UL Listed and rated Type 3R for outdoor use, and it measures 7 inches deep, 16.156 inches wide, and 36.078 inches tall, essentially matching the standard PB-034 footprint but without factory knockouts. A manufacturer spec sheet is available for confirming stud and lug placement before installation.Specifications

Amperage rating: Up to 400 Ampere

Phase: 3 Phase

Voltage rating: Up to 600 Volts Alternating Current

Short circuit rating: 50,000 Ampere

Knockouts: No Knockouts

Wire connection: 1/2-13 Stud Line Side, 4 AWG to 600 kcmil Load Side Lugs

Standard: UL Listed, Type 3R

Size: 7L x 16.156W x 36.078H in

QuestionsDoes the PB-034-NK come with knockouts?No, it is supplied with no knockouts so entries can be field cut.Specification sheet (PDF)Back to the catalog