Brand: Milbank · SKU: M404-UG-LC · UPC: 00784572249783 · Category: Enclosures · Type: Meter Sockets
The Milbank M404-UG-LC is a 4 terminal ring type meter socket with a plain top that combines metering, a main breaker, and a 30 branch circuit load center in a single enclosure. It is designed for underground cable entry on a single phase service rated up to 240 volts alternating current, and it belongs to Milbank's HPWR product family. The unit is built around one 400 ampere main breaker with a continuous amperage rating of 320 amperes, and it provides 30 branch circuit positions for downstream loads, letting a contractor land metering, the main disconnect, and branch breakers at one location instead of a separate meter can and panel. There is no bypass provision on this configuration, and grounding is provided through a ground bar rather than a ground lug. Construction is G90 galvanized steel with a powder coat finish, with glass polyester insulation and a single mechanical terminal connection on the line side. Line side wire range runs from 6 AWG up to 350 kcmil. The enclosure is UL Listed, Type 3R for outdoor use, with a 60 Hertz frequency rating and factory knockouts for surface mounting. It measures 6 inches deep, 34.88 inches wide, and 47 inches tall, and a manufacturer spec sheet documents the full dimensions and terminal layout.
It has 30 branch circuit positions built into the same enclosure as the meter socket and main breaker.
No, this configuration has no bypass provision.
Specification sheet (PDF)
Back to the catalog