Brand: Arizona Electrical Solutions · SKU: AES-THHN8-G10-10FT · Category: Wire & cable · Type: THHN Feeder Kits
Arizona Electrical Solutions AES-THHN8-G10-10FT is a 10 ft THHN feeder kit: three 8 AWG stranded bare copper THHN/THWN-2 conductors, color coded black, red and white, bundled with a 10 AWG green equipment grounding conductor cut to the same 10 ft length. The set is cut and bundled in house rather than sold off a reel, so all four conductors arrive ready to pull together into conduit. The 8 AWG phase conductors and the 10 AWG ground are rated 600 volts and nylon jacketed, listed for use in wet or dry locations. Per the vendor description, the 10 AWG ground is sized for a 40–60 A breaker under NEC 250.122, which sizes the equipment ground from the overcurrent device rather than from the phase conductor size, so the breaker or fuse rating feeding the circuit should be checked against that ground size before ordering. This length of 8 AWG feeder kit is intended for feeder runs such as sub-panels, electric ranges, hot tubs and EV chargers, where an electrician or contractor needs matched-length, pre-cut conductors for a single conduit pull rather than measuring and cutting from bulk reels. The conductor material is stranded bare copper, and country of origin is listed as the United States.
This 10 ft kit includes a 10 AWG green equipment grounding conductor alongside the 8 AWG phase conductors.
Per NEC 250.122, the 10 AWG ground is sized for a 40–60 A breaker; confirm the actual overcurrent device rating before ordering.
All conductors in this kit, including the 10 AWG ground, are cut to 10 ft.
Back to the catalog